Make a rugged modular portable powerbank enclosure branded “PGPOWER”. Use the uploaded PNG logo as an embossed front-panel badge. Design must be split into printable parts: – front cover with logo – rear cover with screw posts – central body shell – internal bay for 2–6 × 18650 cells – slot for BMS/charging PCB – ventilation slots – holes for USB-A, USB-C and a small OLED battery indicator. Style: modern tech, outdoor, reinforced corners, shock-resistant. Surface: light matte, slightly grainy, FDM-friendly. Wall thickness: 2.2–3.0 mm. Avoid overhangs steeper than 55°. Design should be easy to print on Bambu A1, Artillery X3 Plus and Aquila X2.
Meshy 6 Preview
Private
Name
Make a rugged modular portable powerbank enclosure branded “PGPOWER”.
Use the uploaded PNG logo as an embossed front-panel badge.
Design must be split into printable parts:
– front cover with logo
– rear cover with screw posts
– central body shell
– internal bay for 2–6 × 18650 cells
– slot for BMS/charging PCB
– ventilation slots
– holes for USB-A, USB-C and a small OLED battery indicator.
Style: modern tech, outdoor, reinforced corners, shock-resistant.
Surface: light matte, slightly grainy, FDM-friendly.
Wall thickness: 2.2–3.0 mm.
Avoid overhangs steeper than 55°.
Design should be easy to print on Bambu A1, Artillery X3 Plus and Aquila X2.
